MAKITA 18V BRUSHLESS 10 PIECE 3 X 5.0AH COMBO KIT DLX1042TX1

Includes

• 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
• 1 x MAKITA 18V 1/4inch Brushless Impact Driver Skin DTD154Z
• 1 x MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z
• 1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z
• 1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z
• 1 x MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z
• 1 x MAKITA 18V Brushless 1/2inch Impact Wrench Friction Ring Skin DTW300Z
• 1 x MAKITA 18V Blower Skin DUB185Z
• 1 x MAKITA 18V LED Torch Skin DML815
• 1 x MAKITA 7.2/18V Jobsite Radio Bluetooth Skin DMR108
• 3 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
• 1 x MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892
• 1 x MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z

The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.

Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

• Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
• 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
• LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
• High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
• 2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
• All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
• XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability

Specifications

• Max. drilling capacities in wood:
  • Auger bit: 50mm
  • Self-feeding bit: 76mm
  • Hole saw: 152mm
• Max. drilling capacities in steel: 13mm
• Max. drilling capacities in masonry: 16mm
• No load speed:
  • Hi: 0 – 2,100rpm
  • Lo: 0 – 550rpm
• Impact rate:
  • Hi: 0 – 31,500ipm
  • Lo: 0 – 8,250ipm
• Max. peak torque: 141Nm
• Max. tightening torque:
  • Hard: 130Nm
  • Soft: 65Nm

MAKITA 18V 1/4inch Brushless Impact Driver Skin DTD154Z

The Makita DTD154Z Brushless Impact Driver has a high rotational speed of 3,600rpm, which is optimum for fast tightening of self-drilling screws. Featuring an aluminium hammer case, variable speed control and one-touch bit installation, this is a powerful and compact drill to suit any line of work. It also features electronic 3-stage impact power selection and the new T-Mode especially for tightening self-drilling screws.

• Aluminium hammer case
• One-touch bit installation, no need to pull bit sleeve for bit installation
• Twin LED job light with pre-glow and afterglow functions
• High rotation speed at 3600rpm
• Variable speed controlled by trigger
• Ergonomically designed handle with soft grip provides comfortable grip and more control while minimising hand fatigue and pain
• Electronic 3-stage impact power selection – in order to reduce fault tightening, hard/medium/soft impact power can be selected to the material of workpiece or screw type simply by pushing a button
• T-Mode is a special mode optimum for fast tightening of self drilling screws without damaging the screw and workpiece

Specifications

• Voltage: 18V
• Capacity:
• Machine screw: M4 – M8
• Standard bolt: M5 – M16
• High strength bolt: M5 – M14
• Coarse thread (length): 22mm – 125mm
• Impacts per minute:
• Speed 1: 0 – 3800ipm
• Speed 2: 0 – 2600ipm
• Speed 3: 0 – 1100ipm
• No load speed:
• Speed 1: 0 – 3600rpm
• Speed 2: 0 – 2100rpm
• Speed 3: 0 – 1100rpm
• Max fastening torque: 175Nm
• Vibration level: 12.5m/s²
• Sound pressure level: 96dB(A)
• Sound power level: 107dB(A)
• Dimensions (L x W x H): 117mm x 79mm x 236mm
• Weight: 1.2kg

MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z

• Kickback detection, anti-restart, and soft start
• Automatic Torque Drive increases torque to power through any cut
• Extreme performance with 8,500rpm no load speed
• XPT technology that protects against dust & moisture
• Electronic current limiter
• Easy to hold grip design with rubber for anti-skid
• World’s deepest concrete cutting mobile angle grinder at a depth of 20mm
• Excellent performance – as powerful as AC model
• Gear housing can be rotated to suit most cutting and grinding applications
• Automatic speed control changes the cutting speed according to load condition for an optimum operation
• Anti-restart function prevents accidental startup for safety even if the machine is plugged into a power source with the lock-on switch on

MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z

• Powerful Brushless DC motor (BLDC)
• Automatic Torque Drive; automatically increases motor torque according to load conditions
• Magnesium base with 45 and 50 degrees bevel cutting capacity
• Compact and lightweight design
• Rear dust exhaust port
• Twin LED job light with pre-glow
• LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
• Tool hanger for hanging on a ladder or rafter
• Large lock off lever easily operated even with a gloved hand
• Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

Specifications

• Voltage: 18V
• No Load Speed: 5,000rpm
• Bevel Capacity: 50º
• Blade Diameter: 165mm
• Max Cutting Capacities:
• 0º: 57mm
• 45º: 41mm
• 50º: 37mm
• Weight: 3.3kg
• Length: 350mm

MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z

• 3 Mode operation: hammer only, rotation only, rotation & hammer
• Unique rubber joint suppresses vibration to battery
• 2.0j of impact energy

Specifications

• Impact Rate: 0 – 4,700ipm
• Vibration per min: 13.5m/s²

MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z

• 32mm stroke with a cutting capacity of 255mm in wood
• Newly designed vertical crank mechanism reduces vibration
• High performance 3,000spm no-load speed
• Rafter hanging hook for added convenience
• XPT technology that protects against dust & moisture

Specifications

• Length of Stroke: 32mm
• Max. cutting capacities in pipe: ø 130mm
• Max. cutting capacities in wood: 255mm
• Overall Length: 439mm
• Strokes per minute
  • Hi: 0 – 3,000spm
  • Lo: 0 – 2,300spm
• Voltage 18V

MAKITA 18V Brushless 1/2inch Impact Wrench Friction Ring Skin DTW300Z

• Variable speed trigger & Quick Trigger mode which engages immediate full speed
• Forward & Reverse Automatic Stop, with 6 modes for customised applications
• High power in a compact design with 330Nm maximum fastening torque
• 4 stages of impact force enables the user to set the appropriate torque for each application
• Extreme Protection Technology (XPT) provides enhanced protection against dust and moisture

Specifications

• Drive Shank: 12.7mm (1/2”) Square
• Impact Rate
  • Max: 0 – 4,000ipm
  • High: 0 – 3,400ipm
  • Med: 0 – 2,600ipm, Soft: 1,800ipm
• Max. capacities high tensile bolt: M10 – M16
• Max. capacities standard bolt: M10 – M20
• Max. fastening torque
  • Max: 330Nm
  • Hard: 210Nm
  • Medium: 160Nm
  • Soft: 100Nm
• No Load Speed
  • Max: 0 – 3,200rpm
  • High: 0 – 2,600rpm
  • Medium: 0 – 1,800rpm
  • Soft: 0 – 1,000rpm
• Nut busting torque: 580Nm
• Voltage 18V

MAKITA 18V Blower Skin DUB185Z

• Increased air volume with 3.2m³/min
• 3 stage air volume settings & variable speed trigger for maximum control
• Wind speeds of up to 352km/h for higher blowing efficiency
• Ultra-lightweight at just 2.1kg

Specifications

• Increased air volume with 3.2m³/min
• 3 stage air volume settings & variable speed trigger for maximum control
• Wind speeds of up to 352km/h for higher blowing efficiency
• Ultra-lightweight at just 2.1kg
• Specifications
• Max air volume: 3.2m³/min
• Max. Air Velocity: 352km/h
• No Load Speed: 0 – 18,000rpm
• Overall Length: 517mm
• Skin weight: 1.5kg
• Voltage: 18V

*Dust bag is not included.

MAKITA 18V LED Torch Skin DML815

The Makita 18V LXT L.E.D. Flashlight (DML815) delivers bright illumination, versatility, and convenience. The high-luminance 4 L.E.D. flashlight provides 160 lumens. The fast-charging Makita 18V LXT Lithium-Ion Battery delivers up to 23 hours of continuous illumination on a single charge (when using the 18V LXT® Lithium-Ion 5.0Ah battery, sold separately).

The 12-position aluminum pivoting head provides added versatility, with a durable design engineered for job site conditions. A metal hang-hook provides added convenience. The flashlight has a slim, compact design at 10-3/4”L and weighs only 1.95 lbs. (with 18V LXT battery, sold separately).

It’s part of Makita’s expanding 18V LXT system, the world’s largest cordless tool system powered by 18V lithium-ion batteries. Makita 18V LXT Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

• High-luminance 4 L.E.D. flashlight provides 160 lumens
• 12 position pivoting flashlight head with positive stops from 60° – 110°
• Metal hang hook is convenient and job site durable
• Multi-faceted reflector controls the direction and spread of the light
• L.E.D. and provides a sharp, round spotlight
• Compact and ergonomic design at only 10-3/4′ long
• Weighs only 1.95 lbs. with battery (battery and charger not included)
• Rubberized soft grip provides increased comfort on the job
• An ideal addition to any toolbox or workshop
• Battery and charger sold separately
• Only use genuine Makita batteries and chargers

Specifications

• Power Type: Cordless
• Battery: 18V LXT Lithium-Ion
• Lumens: 160
• Bulb: 4 LED

MAKITA 7.2/18V Jobsite Radio Bluetooth Skin DMR108

• Flexible antenna – can be folded and protected underneath the carry handle or removed and stored inside the battery compartment
• Durable design – front metal pipe and elastomer bumpers protect against rough handling with falling impact strength of 1.0m
• AUX-IN jack – can be used as a stereo speaker by connecting an external audio source via 3.5mm AUX cable
• Dust and shower-proof construction – IP64 rated for use in outdoor applications
• 2 speaker stereo – 2 x large 89mm speakers provide high-quality sound
• AC adapter jack – the user has the option to power the unit by Makita Li-ion batteries or AC power via the supplied AC adapter
• Bluetooth for streaming audio and foldable antenna for radio
• USB Ports for charging mobile devices
• Compatible with Makita li-ion batteries (7.2V, 10.8V, 12VMAX, 14.4V, and 18V)

Specifications

• Power source: AC or Makita Li-ion batteries
• Continuous runtime: 6.0Ah – 42hrs
• Frequency band: AM: 522 – 1,710kHz / FM: 87.5 – 108MHz
• Practical max. output: 7.2V:0.5Wx2 / 18V:3.5Wx2
• Speaker: 89mm x2
• Bluetooth: Yes

MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 33% more run time per charge compared to BL1830
• Fast 40 minute charging time
• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20&degC)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
• Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892

• Fast charging – charges Li-Ion 3.0Ah battery in only22 minutes and Li-Ion Compact series batteries in only 15 mins
• Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
• Forced air cooling fan – cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

• Ideal for transport & storage of your favourite Makita tools
• Weather Resistant
• Durable Nylon Cordura Construction
• Internal Pockets feature straps to retain tools during transit
• External pockets enable storage of accessories and more